A user cannot save large files to a directory on a Linux server that was accepting smaller files a few minutes ago. Which of the following commands should a technician use to identify the issue?
Correct Answer:
C
The df -h command should be used to identify the issue of not being able to save large files to a directory on a Linux server. The df -h command displays disk space usage in human-readable format for all mounted file systems on the server. It shows the total size, used space, available space, percentage of use, and mount point of each file system. By using this command, a technician can check if there is enough free space on the file system where the directory is located or if it has reached its capacity limit.
A Linux server was recently updated. Now, the server stops during the boot process with a blank screen and an f prompt. Which of the following is the most likely cause of this issue?
Correct Answer:
B
The most likely cause of this issue is that the UEFI boot was interrupted by a missing Linux boot file. UEFI (Unified Extensible Firmware Interface) is a standard that defines the interface and functionality of the firmware that initializes the hardware and software components of a system before loading the operating system. UEFI boot is a process that uses UEFI firmware to load and execute a boot loader, which is a program that loads the operating system kernel and other essential files. A Linux boot file is a file that contains information and instructions for the boot loader, such as the location of the kernel, the root file system, and the boot parameters. If a Linux boot file is missing or corrupted, the boot loader cannot find or load the kernel, and the system stops during the boot process with a blank screen and an f prompt.
References: CompTIA Server+ SK0-005 Certification Study Guide, Chapter 4, Lesson 4.1, Objective 4.1
A very old PC is running a critical, proprietary application in MS-DOS. Administrators are concerned about the stability of this computer. Installation media has been lost, and the vendor is out of business. Which of the following would be the BEST course of action to preserve business continuity?
Correct Answer:
B
The best course of action to preserve business continuity for a very old PC that is running a critical, proprietary application in MS-DOS is to purchase matching hardware and clone the disk. This way, the technician can create an exact copy of the PC’s configuration and data on another PC that has the same specifications and compatibility. This will ensure that the application can run smoothly on the new PC without any installation or configuration issues. Performing scheduled chkdsk tests would not help, as chkdsk is a tool that checks and repairs disk errors, but does not prevent hardware failures or software compatibility issues. Upgrading the hard disk to SSD would not help either, as
SSDs may not be compatible with the old PC or the MS-DOS operating system. Performing quarterly backups would help with data protection, but not with hardware availability or software compatibility. References: https://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/https://www.howtogeek.com/66776/how-to- repair-disk-errors-in-windows-7/
A systems administrator recently installed a new virtual server. After completing the installation, the administrator was only able to reach a few of the servers on the network. While testing, the administrator discovered only servers that had similar IP addresses were reachable. Which of the following is the most likely cause of the issue?
Correct Answer:
B
A subnet mask is a number that distinguishes the network address and the host address within an IP address1. A subnet mask allows network traffic to understand IP addresses by splitting them into the network and host addresses. If the subnet mask is incorrect, the network traffic may not be able to determine the correct destination for the packets, and only reach some of the servers that have similar IP addresses. For example, if the new virtual server has an IP address of 192.168.1.100 and a subnet mask of 255.255.0.0, it can only communicate with servers that have IP addressesin the range of 192.168.0.0 to 192.168.255.2552. To fix this issue, the systems administrator needs to check and correct the subnet mask of the new virtual server according to the network configuration.
A server administrator wants to check the open ports on a server. Which of the following commands should the administrator use to complete the task?
Correct Answer:
D
netstat is a command-line tool that displays network connections, routing tables, interface statistics, and more. The -a option shows all listening and non-listening sockets on the server. This can help check the open ports on a server and identify any unwanted or malicious connections.References:https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/netstat
