NS0-520 Free Practice Test

- (Exam Topic 2)
You have a 4-node cluster with a FAS8200 HA pair and an AFF A300 HA pair. You need to migrate a LUN from a FAS8200 node to an AFF A300 node for faster performance.
Which method will non-disruptively migrate the LUN to the AFF A300 while retaining snapshots of the LUN on the FAS8200?

1. A. You move the LUN.
2. B. You relocate the aggregate.
3. C. You move the volume.
4. D. You copy the LUN.

Correct Answer: D

- (Exam Topic 2)
Which two components must be verified for a supported NetApp SAN confutation? (Choose two.)

1. A. host memory
2. B. host GPU
3. C. host multipath
4. D. host bus adapter

Correct Answer: CD

- (Exam Topic 1)

You connected your FAS8200 to a Brocade SAN switch. As shown in the exhibit, port 0e is not available. In this scenario, which statement is correct?

1. A. The incorrect SFP+ module is installed.
2. B. The switch zoning is using the FC nodename.
3. C. The incorrect firmware revision is installed.
4. D. The switch port is configured for mode E_Port.

Correct Answer: D

- (Exam Topic 3)
An administrator enabled the FCP protocol on an SVM and created a boot LUN for a Windows Server 2019 server host. The host is attached using multiple paths to the storage SVM. After correctly adding
the LUN to the igroup and setting its LUN ID to 1, the host is unable to boot using the installed FC HBA.

1. A. The LUN ID must be set to 0
2. B. The LUN ID must be set to 255
3. C. During the boot process, using FCP is not supported by Netapp
4. D. During the boot process, using FCP is not supported by Microsoft

Correct Answer: A
Create the LUN that you want to use as a boot device, and map it to the igroup as LUN ID 0 You can find more information on this link:
https://library.netapp.com/ecmdocs/ECMP1656701/html/GUID-76BFD6AC-BC2A-419A-9DD3-D98423B2B6

- (Exam Topic 3)
During maintenance of an AFF A250 node, you want to move the SAN LIFs that are members of a port set. In this scenario, which two statements are true? (choose two)

1. A. You must disable SLM for the node that hosts the LIF
2. B. You need to disable the zoning of the LIF WWPN
3. C. The LIF must be removed from the port set
4. D. You must take the SAN LIF offline

Correct Answer: CD
If the LIF is a member of a port set, the LIF must have been removed from the port set before the LIF can be moved to a different node.
Change the status of the LIF to down (offline) You can find more information on this link:
https://docs.netapp.com/ontap-9/index.jsp?topic=/com.netapp.doc.dot-cm-sanag/GUID-09F5C2A3-FA6