N10-007 Free Practice Test

- (Exam Topic 1)
A network technician has salvaged several Ethernet cables from a datacenter. The technician attempts to use the cables to connect desktops to the network without success. Which of the following is MOST likely the issue?

1. A. The cables have an incorrect pin-out.
2. B. The cables are UTP instead of STP.
3. C. The cables are Cat 6 instead of Cat 5.
4. D. The cables are not plenum rated.

Correct Answer: A

- (Exam Topic 1)
Multiple users are reporting that they are unable to access the network. The ENTIRE network is shown in the diagram. PCs are not statically assigned IP addresses. The following devices will display settings.
• WorkstationA
• WorkstationB
• WofkstationC
• WorkstationD
• WokstationE
• WorkstalionF
• WorkstalionG
• Laptop1
• Laptop2
• DHCP server1
• DHCP serverr2
Review the settings and select the box in the diagram that identifies the device causing the issue. Only one device can be selected at a time.
After checking the device that is causing the issue, select the second tab in the lower left hand corner. Identify the reason as to why some users are unable to access the network.












Part 2
Identify the reason as to why some users are unable to access the network.

1. A. Workstation(s) are plugged into switch ports configured with half duplex.
2. B. The site-to-site router was configured with the incorrect ACL.
3. C. DHCP server scope is full and is not providing IP addresses.
4. D. WAN and LAN ports are reversed on the router.
5. E. STP had disabled some of the ports on the switch.
6. F. The NIC driver is not installed.
7. G. A wireless client is unable to associate to the AP.

Correct Answer: G

- (Exam Topic 1)
A network technician has to integrate three legacy industrial devices into the existing wireless network. The devices only support 802.11b and TKIP. Which of the following should the technician do to connect these devices to the wireless network with the restrictive settings while not affecting the performance of the other users? (Select Two).

1. A. Create a second SSID that uses WPA personal.
2. B. Change the encryption to WPA@ personal.
3. C. Enable MAC filtering.
4. D. Change the encryption to WPA2 Enterprise.

Correct Answer: D

- (Exam Topic 1)
AChief Information Officer (CIO) is concentrated about an attacker gaining administrative access to the
company’s network devices. Which of the following is the MOST secure way to prevent this?

1. A. ACL allowing only HTTP
2. B. ACL allowing only Telnet
3. C. Out-of-band modem
4. D. Out-of-band console router

Correct Answer: D

- (Exam Topic 2)
Which of the following is the MOST economical way for Sandy, a technician, to implement 10- Gigabit Ethernet at a datacenter?

1. A. 10GBaseLR
2. B. 10GBaseSR
3. C. 10GBaseX
4. D. 10GBaseT

Correct Answer: D