HPE6-A70 Free Practice Test

An Aruba solution runs ArubaOS 8 and uses a mobility master architecture. Which feature can network administrators use to balance wireless devices across APs on different channels?

1. A. AirMatch
2. B. Client Match
3. C. AppRF
4. D. ARM

Correct Answer: B

A company plans to deploy a Mobility Master (MM) solution with two MM nodes. The MM solution will manage 10 Mobility Controller (MC) appliances that will control a total of 400 APs.
How should the network administrator install the AP licenses?

1. A. 40 AP licenses on the MM and no licenses on the MC
2. B. 400 AP licenses on the MM and no licenses on the MC
3. C. 800 AP licenses on each MC and no licenses on the MC
4. D. 800 AP licenses on the MM and 40 AP licenses on each MC

Correct Answer: B

A network administrator needs to configure firewall rules for three roles:
< > >< > > >

1. A. Define the Employee and Sales roles as internal roles, and then configure the rules as global rules for internal users.
2. B. Apply these rules as a subnet-based policy, and then ensure that only Employee and Sales users are assigned IP addresses in that subnet.
3. C. Select either the Employee or Sales role, and then configure these rules within the global policy.
4. D. Create a policy with these rules, and then apply that policy to the Employee and Sales roles.

Correct Answer: D

Refer to the exhibits.
Exhibit 1
< ><>>< ><>>exhibits show some of the settings for this WLAN.
Which settings must the administrator configure on each Mobility Controller (MC) at the device level for this configuration to function properly?

1. A. an IPsec preshared key
2. B. CPSec certificates
3. C. a portal page
4. D. VLAN 99 IP settings

Correct Answer: D

A company deploys a wireless network in a typical office environment with many surfaces where the signal can bounce. Which 802.11 technology uses the characteristics of this environment to increase wireless speeds?

1. A. Channel bonding
2. B. Multiple Input Multiple Output (MIMO)
3. C. Transmit Power Control (TPC)
4. D. QAM modulation

Correct Answer: B