HPE6-A45 Free Practice Test

Refer to the exhibits. Exhibit 1.
< ><>>< ><>

1. A. Instance 1 = VLANs 4-5 Instance 2 = VLANs 6-7Switch 2 instance 1 priority = 0 Switch 2 instance 2 priority = 1 Switch 3 instance 1 priority = 1 Switch 3 instance 2priority = 0
2. B. Instance 1 = VLANs 4,6 Instance 2 = VLANs 5,7Switch 2 instance 1 priority = 0 Switch 2 instance 2 priority = 1 Switch 3 instance 1 priority = 1 Switch 3 instance 2priority = 0
3. C. Instance 1 = VLANs 4,6 Instance 2 = VLANs 5,7Switch 2 instance 1 priority = 0 Switch 2 instance 2 priority = 1Switch 3 instance 1 priority = 0 Switch 3 instance 2 priority = 1
4. D. Instance 1 = VLANs 4-5 Instance 2 = VLANs 6-7Switch 2 instance 1 priority = 0 Switch 2 instance 2 priority = 1 Switch 3 instance 1 priority = 0 Switch 3 instance 2priority = 1

Correct Answer: C

Refer to the exhibits.
< ><>>< ><>

1. A. the mismatch between the key IDs specified in chain10 and chain11 on Switch-1
2. B. the mismatch between the key-strings in the chains for VLAN 10 and VLAN 11 on Switch-1
3. C. the mismatch between the chain names associated with VLAN 11 on Switch-1 and on Switch-3
4. D. the mismatch between the key-strings associated with VLAN 10 on Switch-1 and on Switch-2

Correct Answer: D

A company has AOS-Switches, Aruba ClearPass, and Aruba AirWave. A network administrator needs to set up a new switch with the same settings found on other switches in the company.
Which action is likely to be the most useful to perform the task?

1. A. View usage patterns on the switches on AirWave.
2. B. Retrieve the running config from ClearPass.
3. C. Use the configuration audit tool on AirWave.
4. D. Access the Network Device view on ClearPas

Correct Answer: B

Refer to the exhibit.
<>>

1. A. Configure echo mode BFD on the VLAN that connects Switch-1 and Switch-2.
2. B. Add VRRP on the VLAN between Switch-1 and Switch-2.
3. C. Configure graceful restart, or nonstop OSPF, on Switch-1 and Switch-2, with a proper timer.
4. D. Create a redundant virtual link between Switch-1 and Switch-2.

Correct Answer: A

What is one difference between BPDU protection and root guard?

1. A. BPDU protection works with RPVST+, RSTP, and MST
2. B. Root guard works with RSTP or MSTP, but not RPVST+.
3. C. BPDU protection blocks a port if it receives any BPDU, but root guard blocks a port only if the BPDU indicates a better root path.
4. D. BPDU protection is typically implemented on edge ports, but root guard is typically implemented on uplinks with theroot port role.
5. E. BPDU protection drops BPDUs received on a port, but does not block the por
6. F. Root guard blocks the port if it receives a BPDU.

Correct Answer: B