CWAP-404 Dumps

CWAP-404 Free Practice Test

CWNP CWAP-404: Certified Wireless Analysis Professional

QUESTION 11

Which piece of information is not transmitted in an HT PPDU header?

Correct Answer: D
The channel number is not transmitted in an HT PPDU header. An HT PPDU header is a part of the PPDU that contains information such as modulation, coding, data rate, and number of spatial streams for an 802.11n transmission. The channel number is not included in the HT PPDU header, as it is determined by the frequency band and channel width that are used by the transmitter and receiver. The channel number can be inferred from the frequency band and channel width, which are indicated by bits in different fields of the HT PPDU header, such as HT-SIG and HT-LTF. The other options are not correct, as they are transmitted in an HT PPDU header. The number of spatial streams,
PPDU length, and MCS index are indicated by bits in the HT-SIG field of the HT PPDU header. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 108-109

QUESTION 12

You are troubleshooting a client that is experiencing slow WLAN performance. As part of the troubleshooting activity, you start a packet capture on your laptop close to the client device. While analyzing the packets, you suspect that you have not captured all packets transmitted by the client. By analyzing the trace file, how can you confirm if you have missing packets?

Correct Answer: C
One way to confirm if you have missing packets in your packet capture is to look for gaps in the sequence number in MAC headers. The sequence number is a 12-bit field in the MAC header that is used to identify and order data frames within a traffic stream. The sequence number is incremented by one for each new data frame transmitted by a STA, except for retransmissions, fragments, and control frames. The sequence number can range from 0 to 4095, and then wraps around to 0. If you see a jump or a gap in the sequence number between two consecutive data frames from the same STA, it means that you have missed some packets in between. The other options are not correct, as they do not confirm if you have missing packets in your packet capture. CRC errored packets are packets that have been corrupted during transmission and have failed the error detection check. Protocol analyzers may show the number of CRC errored packets in their statistics view, but not the number of missing packets. Retransmissions are an indication of packet loss or collision, but not necessarily of missing packets in your capture. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 114-115

QUESTION 13

The PHY layer provides framing by adding a header to create what type of data unit?

Correct Answer: D
The PHY layer provides framing by adding a header to create a PPDU. A PPDU (PHY Protocol Data Unit) is the data unit that is transmitted or received over the wireless medium by the PHY layer. A PPDU consists of a PSDU (PHY Service Data Unit) and a PHY header, which contains information such as modulation, coding, and data rate. The PHY layer adds the PHY header to the PSDU to create a PPDU for transmission, or removes the PHY header from the PPDU to extract the PSDU for reception. The other options are not correct, as they are not created by adding a header at the PHY layer. An MPDU (MAC Protocol Data Unit) is created by adding a MAC header and FCS to an MSDU (MAC Service Data Unit) at the MAC layer. An MSDU is the data unit that is passed from the LLC sublayer to the MAC sublayer or vice versa. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 97-98

QUESTION 14

What is used to respond with an uplink transmission to an MU-RTS trigger frame in the 802.11ax PHY?

Correct Answer: C
An HE TB PPDU (High Efficiency Trigger-Based Packet Data Unit) is used to respond with an uplink transmission to an MU-RTS trigger frame in the 802.11ax PHY (Physical Layer). An MU-RTS trigger frame is a frame that initiates a multi-user transmission opportunity (MU-TXOP) by requesting multiple stations (STAs) to send clear- to-send (CTS) frames on different spatial streams or resource units (RUs). An HE TB PPDU is a frame that contains data from multiple STAs that have been allocated RUs by an MU-RTS trigger frame or another type of trigger frame. An HE SU PPDU (High Efficiency Single User Packet Data Unit) is a frame that contains data from a single STA using all available spatial streams or RUs. An HE MU PPDU (High Efficiency Multi User Packet Data Unit) is a frame that contains data from multiple STAs using different spatial streams or RUs without being triggered by another frame. A VHT PPDU (Very High Throughput Packet Data Unit) is a frame that uses the 802.11ac PHY and does not support multi-user transmissions.References:
✑ CWAP-404 Study Guide, Chapter 3: 802.11 MAC Layer Frame Formats and
Technologies, page 101
✑ CWAP-404 Objectives, Section 3.4: Analyze multi-user transmissions
✑ CWAP-404 Study Guide, Chapter 3: 802.11 MAC Layer Frame Formats and Technologies, page 99

QUESTION 15

Which one of the these is the most important in the WLAN troubleshooting methodology among those listed?

Correct Answer: C
Observing the problem is the most important step in the WLAN troubleshooting methodology among those listed. This step involves capturing and analyzing the relevant data from the wireless network, such as packets, frames, spectrum, and performance metrics. Observing the problem helps to verify the existence and scope of the issue, identify the root cause and possible solutions, and validate the results of any actions taken. The other steps are also important, but they are not as critical as observing the problem12 References:
✑ CWAP-404 Study Guide, Chapter 1: Troubleshooting Methodology, page 15
✑ CWAP-404 Objectives, Section 1.2: Observe the problem