70-741 Free Practice Test

You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled.
You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the proxy.
On Server1, you run the command Set-DAClient -forceTunnel Enabled.
You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet resources through the proxy.
What should you run on Server1?

1. A. Set-DnsClientGlobalSetting
2. B. Set-DAEntryPoint
3. C. Set-DnsClientNrptRule
4. D. Set-DnsClientNrptGlobal

Correct Answer: B

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
< ><>>>>< ><>>>>The name server7.tailspintoys.com to the 192.168.100.101 IP address
Which types of DNS records should you use? To answer, drag the appropriate DNS record types to the correct requirements. Each DNS record type may be used once, more than one, or not at all. You may need to drag the
split bar between panes or scroll to view content.

Solution:


Does this meet the goal?

1. A. Yes
2. B. No

Correct Answer: A

You have a Hyper-V server named Server1 that runs Windows Server 2016. Server1 has an IP address of 192.168.1.78. Server1 has a container named Container1 that hosts a web application on port 84. Container1 has an IP address of 172.16.5.6. Container1 has a port mapping from port 80 on Server1 to port 84 on Container1. You have a server named Server2 that has an IP address of 192.168.1.79, You need to connect to the web application from Server2. To which IP address and port should you connect?

1. A. 172.16.5.6:80
2. B. 192.168.1.78:80
3. C. 172.16.5.6:84
4. D. 192.168.1.78:84

Correct Answer: C

You have the servers configured as shown in the following table.
< ><>>>< ><>>>
Solution:


Does this meet the goal?

1. A. Yes
2. B. No

Correct Answer: A

You have a DHCP server named Server1 that runs Windows Server 2016. You have a single IP subnet.
Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.
You need to create a second logical IP network on the subnet. The subnet will use an IP address range of
10.1.2.10 to 10.0.2.200 and a length of 24 bits.
What should you do?

1. A. Create a second scope, and then create a superscope.
2. B. Create a superscope, and then configure an exclusion range in Scope1.
3. C. Create a new scope, and then modify the IPv4 bindings.
4. D. Create a second scope, and then run the DHCP Split-Scope Configuration Wizard.

Correct Answer: A