350-501 Free Practice Test

Refer to the exhibit.

An engineer configured BGP summarization on a customer's network. Which route is advertised to BGP peers?

1. A. 192.0.0.0/16
2. B. 192168.0.0/16
3. C. 192.168.1.0/24
4. D. 192168.0.5/30

Correct Answer: B

A network engineer must configure a router for Flexible NetFlow IPFIX export. The IP address of the destination server is 172.17.12.1. The source address must be set to the Loopback0 IPv4 address and exported packets must be set to DSCP CS3. The TTL must be 64 and the transport protocol must be set to UDP with destination port 4739. Which configuration must the engineer apply to the router?

1. A. configure terminalflow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0dscp 3ttl 64export-protocol netflow-v9 transport udp 4739end
2. B. configure terminalflow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0dscp 24ttl 64export-protocol ipfix end
3. C. configure terminalflow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0dscp 24ttl 64export-protocol netflow-v9 transport udp 4739end
4. D. configure terminalflow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0dscp 3ttl 64export-protocol ipfix end

Correct Answer: B
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/configuration/xe-3s/fnf-xe-3s-book/fnf-ipfix-export

Refer to the exhibit.


EIGRP a running across the core lo exchange Internal routes, and each router maintains 6GP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2 for IP address 10.0.1.1. which is used as a black hole route as shown. Which configuration should the operator Implement to me management rouler to create a route map that will redistribute lagged static routes into BGP and create a static route to blackhole traffic with tag 777 that Is destined to server at 192.168.10.100?

1. A. Option A
2. B. Option B
3. C. Option C
4. D. Option D

Correct Answer: D

An engineer working for a private telecommunication company with an employe id:3948:613 needs to limit the malicious traffic on their network. Which configuration must the engineer use to implement URPF loose mode on the GigabitEthernet0/1 interface?
A)

B)

C)

D)

1. A. Option A
2. B. Option B
3. C. Option C
4. D. Option D

Correct Answer: A
“reachable-via any” must be configured for Loose mode on both IPv4 & IPv6. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/xe-3s/sec-data-urpf-xe-3s-book/

Which OS uses a distributed subsystem architecture?

1. A. IOS XE
2. B. IOS
3. C. IOS XR
4. D. CatOS

Correct Answer: C