350-501 Free Practice Test

Refer to Exhibit.

A network engineer is trying to retrieve SNMP MIBs with RESTCONF on the Cisco switch but fails.
End-to-end routing is in place. Which configuration must the engineer implement on the switch to complete?

1. A. netconf-yang cisco-ia snamp-community -string Public
2. B. snmp-server community cisco RW
3. C. snmp-server community public RO
4. D. netconf-yang cisco-Ia snmp-community-string Private

Correct Answer: B

Refer to the exhibit.

A network engineer configures CPE-1 for QoS with these requirements: IPv4 and IPv6 traffic originated by the CPE-1 WAN IP address must be marked with DSCP CS3. IPv4 LAN traffic must be marked with DSCP CS1.
IPv6 LAN traffic must be marked with DSCP default.
Which configuration must the engineer implement on CPE-1?

1. A. class-map match-any SELF_TRAFFIC match access-group name SELF_V4 match access-group name SELF_V6 class-map match-all V4_ TRAFFIC match protocol ipclass-map match-all V6_TRAFFIC match protocol ipv6class-map match-all QG_4 match qos-group 4class-map match-all QG_6 match qos-group 6!policy-map LAN-INPUT class V4_TRAFFICset qos-group 4 class V6_TRAFFIC set qos-group 6!policy-map WAN-OUTPUT class SELF_TRAFFICset ip dscp cs3 class QG_4 set ip dscp cs1 class QG_6set ip dscp default
2. B. class-map match-all SELF_TRAFFIC match access-group name SELF_V4 match access-group name SELF_V6 class-map match-all V4_ TRAFFIC match protocol ipclass-map match-all V6_TRAFFIC match protocol ipv6class-map match-all QG_4 match qos-group 4class-map match-all QG_6 match qos-group 6!policy-map LAN-INPUT class V4_TRAFFICset qos-group 4 class V6_TRAFFIC set qos-group 6!policy-map WAN-OUTPUT class SELF_TRAFFICset dscp cs3 class QG_4 set ip dscp cs1 class QG_6set dscp default
3. C. class-map match-all SELF_TRAFFIC match access-group name SELF_V4 match access-group name SELF_V6 class-map match-all V4_ TRAFFIC match protocol ipclass-map match-all V6_TRAFFIC match protocol ipv6class-map match-all QG_4 match qos-group 4class-map match-all QG_6 match qos-group 6!policy-map LAN-INPUT class V4_TRAFFICset qos-group 4 class V6_TRAFFIC set qos-group 6!policy-map WAN-OUTPUT class SELF_TRAFFICset ip dscp cs3 class QG_4 set ip dscp cs1 class QG_6set ip dscp default
4. D. class-map match-any SELF_TRAFFIC match access-group name SELF_V4 match access-group name SELF_V6 class-map match-all V4_ TRAFFIC match protocol ipclass-map match-all V6_TRAFFIC match protocol ipv6class-map match-all QG_4 match qos-group 4class-map match-all QG_6 match qos-group 6!policy-map LAN-INPUT class V4_TRAFFICset qos-group 4 class V6_TRAFFIC set qos-group 6!policy-map WAN-OUTPUT class SELF_TRAFFICset dscp cs3 class QG_4 set ip dscp cs1 class QG_6set dscp default

Correct Answer: A

Refer to the exhibit:

Which effect of this configuration is true?

1. A. it creates a pseudowire class named Cisco
2. B. It enables tagging for VLAN 12 on the interface
3. C. It enables MPLS on the interface
4. D. It enables AToM on interface gigabitethemet1/0

Correct Answer: D

You are writing an RPL script to accept routes only from certain autonomous systems Consider this code.

If you apply this code to BGP filters, which effect does the code have on your router?

1. A. denies routes from AS 7070
2. B. allows routes from AS 7077
3. C. denies routes from AS 7007
4. D. allows routes from AS 770

Correct Answer: B

Refer to the exhibit.

An engineer needs to implement this QoS policy on customer's network due to ongoing slow network issues. What will be the effect on the network when the engineer implements this configuration?

1. A. Traffic that is identified in the ciscotest class map will be remarked from IP precedence 1 to DSCP AF11 when it enters the pos0/2/0/0 interface.
2. B. Traffic that is identified in the ciscopolicy class map will be marked with IP precedence 1 when it enters the pos0/2/0/0 interface.
3. C. Traffic that is identified in the ciscopolicy class map will be remarked from IP precedence 1 to DSCP AF11 when it exits the pos0/2/0/0 interface.
4. D. Traffic that is identified in the ciscotest class map will be marked with IP precedence 1 when it exits the poso/2/0/0 interface.

Correct Answer: D