350-501 Free Practice Test

In an EVPN operation, how does the PE determine and advertise Ethernet segment reachability?

1. A. The PE discovers the remote PEs in the EVI and builds a flood list linked with the EVI.
2. B. The PE discovers and shared routing information for the B-MAC addresses associated with local Ethernet segments.
3. C. The PE discovers other PEs in the same Ethernet segment and elects a DF.
4. D. The PE discovers remote ESIs and determines their redundancy mode.

Correct Answer: A

Which action does the ingress VTEP perform on traffic between EVPN VXLAN overlays?

1. A. routing and tunneling when doing symmetric IRB
2. B. routing when doing asymmetric IRB
3. C. routing and bridging when doing asymmetric IRB
4. D. bridging when doing symmetric IRB

Correct Answer: C

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-734107.html

Refer to the exhibit:

A network engineer is implementing a BGP protocol. Which effect of the local-as keyword in this configuration is true?

1. A. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family
2. B. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration
3. C. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family
4. D. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.

Correct Answer: D
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13761-39.html

Which core component of MDT describes the data that an MDT-capable device streams to a collector?

1. A. subscription
2. B. encoder
3. C. sensor path
4. D. transport protocol

Correct Answer: C

Refer to the exhibit.

An engineer is updating this network to meet these conditions:
• Area 10 will receive inter-area routes and support mutual redistribution of external routes with the extranet.
• The ::/0 route is prohibited in Area 10.
• Area 11 will receive only the ::/0 route from the ABR.
• External route redistribution is not supported in Area 11.
• The ABR in Area 11 will advertise no interarea routes.
Which two configurations must be performed to meet the requirements? (Choose two.)

1. A. Configure area 11 as nssa no-summary on R7 and as nssa on XR31.
2. B. Configure area 10 as stub on R9 and XR32.
3. C. Configure area 11 as stub no-summary on R7 and as stub on XR31.
4. D. Configure area 11 as nssa default-information-originate on R7 and as nssa on XR31.
5. E. Configure area 10 as nssa on R9 and XR32.

Correct Answer: CE