200-301 Free Practice Test

- (Exam Topic 3)
Refer to the exhibit.

Which route must be configured on R1 so that OSPF routing is used when OSPF is up. but the server is still reachable when OSPF goes down?

1. A. ip route 10.1.1.10 255.255.255.255 172.16.2.2 100
2. B. ip route 10.1.1.0 255.255.255.0 gi0/1 125
3. C. ip route 10.1.1.0 255.255.255.0 172.16.2.2 100
4. D. ip route 10.1.1.10 255.255.255.255 gi0/0 125

Correct Answer: D

- (Exam Topic 2)
When a client and server are not on the same physical network, which device is used to forward requests and replies between client and server for DHCP?

1. A. DHCP relay agent
2. B. DHCP server
3. C. DHCPDISCOVER
4. D. DHCPOFFER

Correct Answer: A

- (Exam Topic 2)
Which two actions influence the EIGRP route selection process? (Choose two)

1. A. The router calculates the reported distance by multiplying the delay on the exiting Interface by 256.
2. B. The router calculates the best backup path to the destination route and assigns it as the feasible successor.
3. C. The router calculates the feasible distance of all paths to the destination route
4. D. The advertised distance is calculated by a downstream neighbor to inform the local router of the bandwidth on the link
5. E. The router must use the advertised distance as the metric for any given route

Correct Answer: BC
The reported distance (or advertised distance) is the cost from the neighbor to the destination. It is calculated from the router advertising the route to the network. For example in the topology below, suppose router A & B are exchanging their routing tables for the first time. Router B says “Hey, the best metric (cost) from me to IOWA is 50 and the metric from you to IOWA is 90” and advertises it to router A.
Router A considers the first metric (50) as the Advertised distance. The second metric (90), which is from NEVADA to IOWA (through IDAHO), is called the Feasible distance.

The reported distance is calculated in the same way of calculating the metric. By default (K1 = 1, K2 = 0, K3
= 1, K4 = 0, K5 = 0), the metric is calculated as follows:

- (Exam Topic 4)
Drag and drop the Ansible features from the left to the right Not all features are used.

Solution:


Does this meet the goal?

1. A. Yes
2. B. No

Correct Answer: A

- (Exam Topic 3)
Refer to the exhibit.

Which two commands when used together create port channel 10? (Choose two.)

1. A. int range g0/0-1channel-group 10 mode active
2. B. int range g0/0-1 chanm.l-group 10 mode desirable
3. C. int range g0/0-1channel-group 10 mode passive
4. D. int range g0/0-1 channel-group 10 mode auto
5. E. int range g0/0-1 channel-group 10 mode on

Correct Answer: AC